IPC J-STD-001 Certified IPC Trainer (CIT) Certification Program | 40 Hours |
Call for Pricing |
| This class provides skill-based training regarding soldering practices and processes as covered in the J-STD-001 and its companion documents. CIT's are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs. |
|
| |
IPC J-STD-001 Certified IPC Trainer (CIT) Recertification Program |
16 Hours |
Call for Pricing |
| CIT's are certified for 24 months and must attend a 16-hour recertification class to maintain their certification status. CIT's will have the opportunity to review the content of the standard in its current revision as well as discuss any clarification of intent resulting from Technical Committee activities. Testing and workmanship samples are required for successful recertification. |
|
| |
IPC-7711/7721 Rework/Repair and Modification Certified IPC Trainer (CIT) Certification Program | 40 Hours |
Call for Pricing |
| This class provides skill-based training regarding rework, repair and modification procedures as covered in the IPC-7711 and IPC-7721 documents. CIT's are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs. |
|
| |
IPC-7711/7721 Rework/Repair and Modification Certified IPC Trainer (CIT) Recertification Program | 16 Hours |
Call for Pricing |
| CIT's are certified for 24 months and must attend a 16-hour recertification class to maintain their certification status. CIT's will have the opportunity to review the content of the standard in its current revision as well as discuss any clarification of intent resulting from Technical Committee activities. Testing and workmanship samples are required for successful recertification. |
|
| |
IPC-A-610 Certified IPC Trainer (CIT) Certification Program | 32 Hours |
Call for Pricing |
| This program will greatly assist any company dedicated to providing quality training to the IPC-A-610 Acceptability Document. CIT's are qualified to conduct Certified IPC Application Specialist (CIS) training and certification programs according to the accept/reject criteria for the appropriate class of product. After successful completion of the course, Instructors are certified for 24 months. |
|
| |
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program | 16 Hours |
Call for Pricing |
| CIT's are certified for 24 months and must attend a 16-hour recertification class to maintain their certification status. |
|
| |
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Certification Program | 32 Hours |
Call for Pricing |
| This training program provides a detailed review of the IPC/WHMA-A-620 Requirements and Acceptance for Cable and Harness Assemblies and concludes with a qualifying examination. CITs are qualified to teach Certified IPC Application Specialist (CIS) training. |
|
| |
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program |
16 Hours |
Call for Pricing |
| CIT's are certified for 24 months and must attend a 16-hour recertification class to maintain their certification status. CIT's will have the opportunity to review the content of the standard in its current revision as well as discuss any clarification of intent resulting from Technical Committee activities. |
|
| |
J-STD-00IES Update, Space Application Addendum to J-STD-001E |
4 Hours |
Call for Pricing |
| This course provides additional requirements over those published in IPC J-STD-001D to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT's who have successfully completed the J-STD-001D Certification Course can attend. |
|
| |
Operator Courses |
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Certification Program | 40 Hours |
Call for Pricing |
The CIS class is modularized to allow you to choose only the classes your company needs. This is a hands-on course.
Module 1 is mandatory and consists of Common procedures.
Modules 2-9 consist of; wire splicing procedures, through hole component removal and installation, chip and MELF rework procedures, rework of SOIC/SOT components, J-lead and QFP rework, printed wiring board circuit and laminate repair, conformal coating removal. |
|
| |
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program | 16 Hours |
Call for Pricing |
| The CIS recertification course is modularized to allow you to choose only the classes your company needs. This is a hands-on course. Module 1 is mandatory and consists of Common procedures. Modules 2-9 consist of; wire splicing procedures, through hole component removal and installation, chip and MELF rework procedures, rework of SOIC/SOT components, J-lead and QFP rework, printed wiring board circuit and laminate repair, conformal coating removal. Testing and workmanship samples are required for successful recertification. |
|
| |
IPC-A-610 Certified IPC Specialist (CIS) Certification Training Program | 21 Hours |
Call for Pricing |
| Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions. |
|
| |
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification Training Program. | 24 Hours |
Call for Pricing |
| This training will familiarize the student with IPC/WHMA-A-620 "Requirements and Acceptance for Cable and Harness Assemblies" document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. |
|
| |
J-STD-001 Certified IPC Specialist (CIS) Training Program | 40 Hours |
Call for Pricing |
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes through-hole technology and Module 4 emphasizes surface mount technology. Module 5 focuses on inspection, inspection methodology, and process control. Modules 2-5 include a hands-on training exercise. Each module consists of 8 classroom hours. |
|
| |
|
